alloy iron

Definitions

  • WordNet 3.6
    • n alloy iron cast iron containing alloying elements (usually nickel or chromium or copper or molybdenum) to increase the strength or facilitate heat treatment
    • ***

Usage

In literature:

Spiegeleisen, an iron which contains a natural alloy of from 10 to 12 per cent.
"Scientific American Supplement, No. 401, September 8, 1883" by Various
It is a malleable forging of pure iron, without alloy, and 7.66 specific gravity.
"Modern India" by William Eleroy Curtis
Besides, he is no longer confined to the alloys of iron and carbon.
"Creative Chemistry" by Edwin E. Slosson
Considerable quantities of an alloy of chromium with iron, called ferrochromium, are now produced for the steel industry.
"An Elementary Study of Chemistry" by William McPherson
Use 5 parts of tin and 1 part of aluminum as the alloy, and solder with the iron or a blow pipe.
"Practical Mechanics for Boys" by J. S. Zerbe
The most characteristic constituent of these bodies is the alloy of iron and nickel, which is almost universally present.
"The Story of the Heavens" by Robert Stawell Ball
The alloy ferrocerium is used to a small extent in iron and steel.
"The Economic Aspect of Geology" by C. K. Leith
Probably we have a chunk of nickel-iron alloy here.
"Astounding Stories, March, 1931" by Various
Various alloys of iron and carbon, also, have to be distinguished.
"The Phase Rule and Its Applications" by Alexander Findlay
White-metal alloys are in use on rubber machines, and cast-iron bearings have been employed satisfactorily for years.
"The Preparation of Plantation Rubber" by Sidney Morgan
Antimony renders iron cold short, the alloy is harder and more fusible, and approaches in character to cast iron.
"The American Quarterly Review" by Various
Among the former are iron, nickel, cobalt, magnetic oxide of iron, and Heusler's alloy.
"The New Gresham Encyclopedia" by Various
The alloy is poured into little iron moulds.
"De Re Metallica" by Georgius Agricola
Meteoric iron is a rich alloy containing about ten per cent of nickel, also cobalt, tin, and copper in much smaller amount.
"Astronomy" by David Todd
The tin penetrates the iron, and forms an alloy.
"Popular Technology; Volume 2" by Edward Hazen
***

In news:

A90 Standard Test Method for Weight of Coating on Iron and Steel Articles with Zinc or Zinc- Alloy Coatings.
This standard applies to control valves having bodies, bonnets, cover plates, and bottom flanges made of carbon steel, low alloy and high alloy (stainless) steel, nickel-base alloy, cast iron, and ductile iron.
Magnetic particle inspection (MPI) is a nondestructive testing (NDT) technique used to detect surface and subsurface defects in ferroelectric materials such as iron, nickel and a few steel alloys.
While low-alloy white-iron castings, which have an alloy content below 4%, develop hardness in the range of 350-550 HB, the high-alloy irons range in hardness from 450-800 HB.
Revision of A90 / A90M - 11Standard Test Method for Weight of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings .
Alkaline-based chemical are used for copper alloys, while other chemicals are used for stainless steel and foils with iron.
Revision of A1079 - 12Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
The reddish material, primarily hydrated iron oxide, formed on iron or its alloys resulting from exposure to humid atmosphere or chemical attack.
It comes as a surprise to many that the primary alloy contained within stainless steel is humble and familiar iron.
An engineering genius who earned two master's degrees by age 19, Stark 's remarkable inventions (repulsor rays, indestructible alloys, "Iron Man" combat armor) are often outshined by his ability to create controversy.
An engineering genius who earned two master's degrees by age 19, Stark's remarkable inventions (repulsor rays, indestructible alloys, "Iron Man" combat armor) are often outshined by his ability to create controversy.
***

In science:

The Earth is like a spherical steel-hearth with a fluid iron-alloy core surrounded by a silicate mantle.
Nature of Planetary Matter and Magnetic Field Generation in the Solar System
The percent alloy (mainly iron metal plus iron sulfide) of 157 ordinary chondrites and 9 enstatite chondrites plotted against a measure of oxygen content. The Earth as a whole, and especially the endo-Earth (core plus lower mantle) is like an enstatite chondrite and unlike an ordinary chondrite.
Nature of Planetary Matter and Magnetic Field Generation in the Solar System
Abstract – The earlier-developed ab initio model and the kinetic Monte Carlo method (KMCM) are used to simulate precipitation in a number of iron-copper alloys with different copper concentrations x and temperatures T .
Studies of concentration and temperature dependencies of precipitation kinetics in iron-copper alloys using kinetic monte carlo and stochastic statistical simulations
Thus there is clear enough fathoming of physical mechanisms for all alternatives of the γ − α martensitic transformation in iron-based alloys.
Physical nature of fcc-bcc martensitic transformation in iron based alloys
Kashchenko, The wave model of martensite growth for the γ − α transformation in iron-based alloys, UIF Nauka, Ekaterinburg, Russia, 1993, pp. 139-168 (in Russian).
Physical nature of fcc-bcc martensitic transformation in iron based alloys
These spin glasses model the magnetic behavior of alloys like iron-gold.
Introduction to Randomness and Statistics
One of the most studied alloys undergoing martensitic transformations is iron-carbon .
Arrested States of Solids
Birch thought that nickel and iron were always alloyed in meteorites and he knew that the total mass of all elements heavier than nickel was too little to comprise a mass as large as the inner core.
Background for Terrestrial Antineutrino Investigations: Scientific Basis of Knowledge on the Composition of the Deep Interior of the Earth
To verify the theory we have performed experiments on thickness dependence of incident neutron beam broadening intensities in ferromagnetic pure iron, nickel and Fe65Ni35 disordered alloy by using the small angle neutron scattering diffractometer with λ = 0.5 nm, installed on IVV2M reactor.
Multiple small angle neutron scattering in ferromagnets
***